Hi all,
As the aircraft had a beaching trolley and of course the kit does not supply one, I scratch built it.
Made from 0.8 mm thick plastic card, Axle is 1.8 mm diameter tube with 0.5 mm rod support brackets.
Wheels are from the ‘Kellerkind’ Tail Skid Trolley (54/077).
Padding bead is 0.5 mm diameter styrene rod from 'PlusModel'.
The three leaf suspension on both sides of the axle are made from three 0.2 mm thick plastic card strips.
Now onto the tail trestle,
Mike