« previous next »
Pages: 1 ... 24 25 [26] 27 28

Author Topic: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11  (Read 91116 times)

Offline Borsos

  • Hero Member
  • *****
  • Posts: 3327
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #375 on: June 24, 2018, 03:46:58 AM »
Really nice!
Andreas
Logged
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18909
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #376 on: June 24, 2018, 04:54:36 AM »
Quote from: Borsos on June 24, 2018, 03:46:58 AM
Really nice!
Andreas

Thanks Andreas, means a lot coming from you. Your builds are always Top Notch!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18909
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #377 on: July 10, 2018, 11:58:24 PM »
Started the rigging on the DV a few days ago. Hard to see as I still need to paint the wires.

RAGIII








Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline Gisbod

  • Hero Member
  • *****
  • Posts: 2438
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #378 on: July 11, 2018, 06:24:47 AM »
Super Rick!

Guy
Logged
“Oh! I have slipped the surly bonds of Earth -
Put out my hand, and touched the face of God.”

P.O. John Gillespie Magee 1941

Offline GazzaS

  • Hero Member
  • *****
  • Posts: 1193
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #379 on: July 11, 2018, 11:43:08 AM »
Very nice, Rick!  I blackened mine with a sharpie before I attached them to the plane.  Didn't seem to bother in heat-shrinking at all and made it much easier on my tired eyes.

Gaz
Logged
There are only two states to be in:  Queensland and blotto.

Offline andonio64

  • Hero Member
  • *****
  • Posts: 1687
  • There's no hurry
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #380 on: July 11, 2018, 05:09:49 PM »
Great work as usual Rick!
I normally do the same Gaz said, blackening the thread with a sharpie.
How do you usually paint the rigging wires?
Logged

Offline Borsos

  • Hero Member
  • *****
  • Posts: 3327
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #381 on: July 11, 2018, 07:45:51 PM »
Wonderful! Fantastic colors and a great overall finish!
There are so many great late Albatrosses around here these days. They call my name („Look! Look into your stash! There are some D V that want to be built!“...)
Andreas
Logged
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline kensar

  • Hero Member
  • *****
  • Posts: 2505
  • Reshaping the world - one piece at a time.
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #382 on: July 11, 2018, 09:54:22 PM »
Very nice looking model, Rick.  This is a Roden kit, right?
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18909
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #383 on: July 12, 2018, 12:20:07 AM »
Quote from: Gisbod on July 11, 2018, 06:24:47 AM
Super Rick!

Guy

Thanks for the comment Guy. Greatly appreciated!
RAGIII


Quote from: GazzaS on July 11, 2018, 11:43:08 AM
Very nice, Rick!  I blackened mine with a sharpie before I attached them to the plane.  Didn't seem to bother in heat-shrinking at all and made it much easier on my tired eyes.

Gaz

Thanks Gaz. I Normally use a sharpie Myself but thought I would try a little Testors Metalizer paint on this one. I did this once before, on my Pfalz I think  8)

RAGIII


Quote from: andonio64 on July 11, 2018, 05:09:49 PM
Great work as usual Rick!
I normally do the same Gaz said, blackening the thread with a sharpie.
How do you usually paint the rigging wires?

I think I answered your question in my reply to Gaz. Normal procedure is sharpie but I experiment from time to time  ;D
RAGIII


Quote from: Borsos on July 11, 2018, 07:45:51 PM
Wonderful! Fantastic colors and a great overall finish!
There are so many great late Albatrosses around here these days. They call my name („Look! Look into your stash! There are some D V that want to be built!“...)
Andreas

Thanks for the comment Andreas. I also have been inspired by the other Albatros builds!
RAGIII

Quote from: p9o1r1sche on July 11, 2018, 09:54:22 PM
Very nice looking model, Rick.  This is a Roden kit, right?


The latest photos are of the Wing Nut Wings DV. The "Other"  Albatros in this thread is Roden. Thanks for looking in and the nice comment.
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline lone modeller

  • Hero Member
  • *****
  • Posts: 5342
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #384 on: July 12, 2018, 03:46:11 AM »
What the others have written Rick: super work on the WNW kit. I found that using invisible thread nearly drove me bonkers when I rigged the O/400 with it.... You are doing an excellent job with it.

Stephen.
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18909
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #385 on: July 13, 2018, 01:26:41 AM »
Quote from: lone modeller on July 12, 2018, 03:46:11 AM
What the others have written Rick: super work on the WNW kit. I found that using invisible thread nearly drove me bonkers when I rigged the O/400 with it.... You are doing an excellent job with it.

Stephen.

Thanks Stephen. Your comment is appreciated!!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline dr 1 ace

  • Hero Member
  • *****
  • Posts: 2340
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #386 on: July 13, 2018, 03:24:43 AM »
Looking Sharp and Crisp !!!!


Ed
Logged
Life is short, enjoy it, nobody gets out alive.

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18909
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #387 on: July 13, 2018, 08:29:40 PM »
Quote from: dr 1 ace on July 13, 2018, 03:24:43 AM
Looking Sharp and Crisp !!!!


Ed

Thanks Ed, greatly appreciate the comment!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline Trackpad

  • Hero Member
  • *****
  • Posts: 1306
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #388 on: July 13, 2018, 10:19:58 PM »
This'll bring it all together Rick. Looking very good so far. Best of luck as you continue!  8)
Logged
Cheers!
Gary

"It was an adventure, a great adventure. And, like all great adventures, we never knew where it would lead or how it would end."

Offline ondra

  • Hero Member
  • *****
  • Posts: 925
Re: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11
« Reply #389 on: July 14, 2018, 01:49:12 AM »
Your standard work, which means excellent, dear friend! ;)

Cheers

Ondra
Logged
Pages: 1 ... 24 25 [26] 27 28
« previous next »