Thanks guys
Spent some time in front of the bench after yard work was out of the way . I opened up the cooling holes in the nose . I had to grid from the inside first the plastic in this area is super thick . Rest went quick and at the same time the rolled edge is glued in place around the engine opening . Cockpit coamings are done and the rolled edge added as well around the engine opening .
Work on the engine itself continued with the left side finished with replaced missing details ( white plastic ) Spark plugs and wires added as well . Springs for the valves are in fixed in place and the lengths trimmed down . Right side is next for details , rockers , push rods and wiring for the plugs . At the same time I drilled out the end of the exhaust pipe , filled and sanded the sink marks .
Alexis