forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: KrzysiekK on August 02, 2018, 06:38:42 PM
-
Hello,
This year SH released s.82 vs of well known Lloyd C.V with more powerful Daimler 185hp. You can find lot of resin part inside with decent quality. Below you can find engine comparision with old Karaya’s one.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_1.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_2.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_4.JPG)
and some short review of plastic parts
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_5.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_6.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_10.JPG)
TBC
-
I am looking forward to another Terrific build K.
RAGIII
-
K., I will follow closely!
My dream is to build a Lloyd one day completely (fuselage and wings) plated with real wood, as done by Chloe Plattner.
Somehow the wooden underside of the fuselage of my Phönix was a small test run ;)
Have fun building this kit,
Frank
-
K., I will follow closely!
My dream is to build a Lloyd one day completely (fuselage and wings) plated with real wood, as done by Chloe Plattner.
Right! saw that magnificent job hundred of times, but mine will be regular painted one:)
well all resin big parts must be adjusted with best approach. I have made the mistake with the floor where used the saw blade instead of sand paper. Nevertheless did the substitute:)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_8.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_12.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_13.JPG)
regards
K
-
Great that you tackled this Lloyd. It is a beautiful plane and I am looking forward to your results.
-
What a cool looking aircraft to model! Nice start.
Gaz
-
Great start on the interior K. You recovered nicely from the floor damage .
RAGIII
-
Looking great, can't wait to see how she progresses.
-
thanks
the inspections are located diferently in s.82 than s.46, so had to use sand paper and PE will follow later on. One was left to be open
Also at this step I started to adjust all supporting elements to be leveled correctly.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_14.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_15.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_18.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_19.JPG)
regards
K
-
Nice start to this project!!
Steve
-
Nice to see an A-H build, I find their aircraft very interesting. Good start on this one so far, I like your attention to detail!
-
Thanks!
Now I have implemented the interior wood and accomplished the engine.
PS. Had to strenghten the resin pipe as broken into 2 separate parts during the treatment
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_16.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_17.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_24.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_25.JPG)
regards
K
-
Hi,
Interior is almost done. For time being it does not look pretty well once halves are joined together but will be easly adjusted.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_30.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_27.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_28.JPG)
regards
K
-
Gorgeous interior, K! Love the wood tones.
Cheers,
Bud
-
Great interiors, I'm longing to see the next steps.
Ciao
Giuseppe
-
Great interieur, very nice woodwork and a great engine. Beautiful as always when you put your hands on a kit.
Bye,
Manni
-
Great work, congratulation!
and beautifull subject, going to follow it!
Xan
-
Just found this - one of the lesser known types so all the more interesting. Superb work so far - the detail is first class. Looking forward to seeing more.
Stephen.
-
Beautiful interior, K.
-
I've been following your progress from the beginning K. The interior is exceptional and more so for the Scale. Great work so far!
Cheers,
Lance
-
Thx!
pls find initial layer for wings & fuslage
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_34.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_32.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_37.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_38.JPG)
and for the fuselage
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_36.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_40.JPG)
regards
K
-
The fuselage is just perfect but I think the contrast on the wings is a little bit too visible. Anyway, great work Krzysiek.
-
I like !!!
-
Sweet!
-
thanks!
I intended to do few layers and now I got the upper wings after 2:
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_43.JPG)
and lower ones at 3. That would be final result
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_45.JPG)
regards
K
-
Looks fantastic K, your efforts are paying off.
-
Looks great with color, and the cockpit is fantastic!
Anyway, I will try my kit with real wood 8) ;)
Cheers,
Frank
-
Ditto all the above comments... await further pictures.
Ed
-
Very fine woodwork, K!
-
Thx!
I have spent few hours dealing on the fuselage with the radiator. Quite difficult assembly as must be fitted several times prior to final montage. Radiator and pipes were made of the resin, which IMHO is quite strong and the risk of pipes break is quite low.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_54.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_52.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_51.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_48.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_47.JPG)
regards
K
-
Wow, the pictures on a clean clear black background showing a real beauty! I like your model :-*
Cheers,
Frank
-
Very nice -excellent photography, too!
-
Wow, I really like what you've done!
Gaz
-
Lovely work, K! I do like your wood tones and the way you've done the graining, very authentic! This will be stunning when completed! Regards, Marc
-
Very nice -excellent photography, too!
Stunning photos!
Gene K
-
Lovely woodwork and beautiful photographs.
Ciao
Giuseppe
-
Absolutely beautiful work on all aspects K! Love the wood paneling on the fuselage and wings!
RAGIII
-
Thx!
Finally I got the „kikiriki” biplane..
Lots of preassembly was involved before the decision to use the glue and get it done. I have also enhanced the support of this unique lady by adding the wheel metal supports and brass central slots.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_57.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_58.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_59.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_60.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_61.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/Lloyd_CV/LCV_62.JPG)
regards
K
-
Man what a good looking bird!
If only SH would scale it up to 1/32!
Ryan
-
Outstanding work all around, K!
Cheers,
Bud
-
Amazing progress!!
Steve
-
Gorgeous work!
RAGIII
-
Great looking plywood birdie. A Lloyd in its essence. Good job, Krzysiek!