Hi SP ,
I thought the same and even remove the pins from the wing and tried different angles checking the incidence and no it is the flaired in wing root sitting to low .
First thought was to saw it free but I figured that this would cause even more damage and with the fuselage walls already thin enough that idea was scraped .
After looking at it for what seemed hours I come up with and a stripe of 20 thou stock super glued in place . The basic shape was sanded and the seem filled on the top . Will that was drying the remaining resin wing root got got removed using round rotor bits . New stock was placed on the bottom and blending in . The middle wings now sit levelled to each other . ( don't mind my misbellyng
This needs to dry just a tad more clean up with some sanding and this part can get resprayed . This area will be masked off a little more on the square side . Masking tape pulled off the panel on the cowl side but that is a very easy fix .