forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Under Construction => Resin Kits => Topic started by: Borsos on February 12, 2016, 11:30:41 PM

Title: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Borsos on February 12, 2016, 11:30:41 PM
Hello guys,
I try to post some pics of my 2nd WWI 1/48 scale built. Here I found my large topic for the next years: Aircraft from the battle of Verdun 1916. I started the Planet Models Rumpler C.I about 1 1/2 years ago and finished it last spring (I took a break to move into our new house...). As far as I can remember it is a great kit without any serious problems.
I scratchbuilt the interior according to the little information in the Windsock Datafile (as far as I could see there was no instrument panel in the Rumpler C.I; now I have seen the CSM kit that proved me wrong...). I used the kit's landing gear struts which are made out of a stronger plastic-like material, but scratchbuilt the cabane struts and the interplane struts. Machine guns are resin and PE- ones from Karaya. I used the Crew (Fritz and Emil) from an quite unknown Resin manufacturer (which name I sadly can't remember right now), but they are really beautifully sculpted and cast. The rigger is a 3D printed figure (these figures are presented somewhere else on this forum).

I finished the kit as a Rumpler C.I that was brought down intact by the French in spring 1916 during the German offensives; the unit is unknown. There's a photo in Jack Herris' wonderful book "Rumpler aircraft of WWI" on page 52. I've seen a profile where this machine is called a plane from KagOHL 4, but I don't believe that. KagOHL 4 used Roman numbers to name the KagOHL and Arabic numbers to namel the Kastas. And KagOHL 4 consisted of the Kastas 19-24.
Well, I hope you like it - although the resin wings started to sag a little (the rigger is doing his best ...). I'll never use such thin resin wings again...
Borsos

(http://i1159.photobucket.com/albums/p640/borsos/IMG_8343_zpsb1dne3o9.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_8343_zpsb1dne3o9.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_9044_zps5c2af1gb.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_9044_zps5c2af1gb.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_1610_zpslkfhqail.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_1610_zpslkfhqail.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_1614_zpszurqciim.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_1614_zpszurqciim.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_1612_zpsmaha0pn4.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_1612_zpsmaha0pn4.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_1611_zpsgdliyyqg.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_1611_zpsgdliyyqg.jpg.html)
(http://i1159.photobucket.com/albums/p640/borsos/IMG_2222_zpsajxrepcb.jpg) (http://s1159.photobucket.com/user/borsos/media/IMG_2222_zpsajxrepcb.jpg.html)
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Edo on February 13, 2016, 12:14:06 AM
Hi Borsos!
You acheived a wonderful finish! Shading and woodgrain are top notch!
And also rigging is very accurate and well done!
very good work all around!

Ciao
edo
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Paperquest on February 13, 2016, 01:42:34 AM
Very nicely done, Borsos.

Mack
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: RAGIII on February 13, 2016, 04:03:31 AM
Borsos,
Awesome work on all counts from the construction to painting and rigging. Your figure work, especially in this scale is Brilliant!
RAGIII
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Des on February 13, 2016, 06:56:44 AM
A very attractive and well finished model Borsos, the overall finish on this model is excellent and the figures are superb.

Des.
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: ALBATROS1234 on February 19, 2016, 11:08:31 AM
great looking rumpler borsos
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: coyotemagic on February 20, 2016, 01:36:55 AM
Hi Borsos!
You acheived a wonderful finish! Shading and woodgrain are top notch!
And also rigging is very accurate and well done!
very good work all around!

Ciao
edo
My thoughts exactly, Borsos!  I love it!  I built this kit a few years ago and to this date, it's my favorite.
Cheers,
Bud
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Borsos on February 20, 2016, 02:36:51 AM
Thank you very much!  :)
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Alexis on February 20, 2016, 11:29:36 AM
Totally cool  8) Love your paint work  :)



Terri
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: uncletony on February 20, 2016, 05:59:50 PM
like!
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Flying Circus on October 23, 2016, 08:13:27 PM
Really a very nice model. Only the mirrored 4 does not reveal itself to me. Why should the Germans bring your numbering mirrored?
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Borsos on October 24, 2016, 02:04:05 AM
Thank you!
It's not on the model, it's the photo. I never noticed that yet...
Borsos
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Juan on October 25, 2016, 11:01:47 AM
Outstanding job all around, you have a little gem there.
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: dtomko on October 25, 2016, 11:20:45 AM
Beautifully done.
Drew
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Monty on October 27, 2016, 05:40:06 AM
A really great result on a kit that really is a challenge - but you did a wonderful job on it, Borsos! I do like your colours and shading technique - just Great! Regards, Marc
Title: Re: Rumpler C.I Verdun-Front 1916 (Planet Models 1/48)
Post by: Borsos on October 27, 2016, 06:21:59 AM
Thank you Juan, Drew and Marc for your very kind comments!
Borsos